Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Thuba's latest activity
-
Tl have 2 pumps one is 2.2 kw and another 5.5 kw. l have 2 questions regarding these. 1. The higher the kw rating doesnt imply higher...
-
-
TThuba replied to the thread clogged suction or discharge pump linr.block ok thanks, how about a clogged suction, needs more power? l want to have a way to know if its the suction or discharge clogged...
-
TThuba replied to the thread clogged suction or discharge pump linr.blocked
-
TSay l have a clogged discharge line, the pump current drawn by a pump should not drop; just as starting a pump with discharge valve...
-
TThuba replied to the thread Screw pump.true,such a big company. Find attached the pump curve they provided, showing anticlowise direction vs nameplate direction, clockwise
-
-
TThuba replied to the thread Screw pump.yes we did
-
TThuba replied to the thread Screw pump.Hi. There is no NRV, but thanks, l contacted the supplier, they assume their plates were incorrectly labelled, it should run...
-
TThuba replied to the thread Screw pump.True, when l run it in the direction of the arrow, l get no flow. But once l run it in the other direction l get a flow!
-
TThuba replied to the thread Screw pump.Hi Pierreick, we modified the pump currently so as to have suction on the drive side. The pump is pump is working perfectly fine, as we...
-
TThuba replied to the thread Screw pump.Thank you sir, so for attached set up, the rotation should be the one shown on pump name plate(shown as red arrow)? And can we say we...
-
-
TAttached is a screw pump with a motor coupled on the side. The pump shows the direction it should run,but that will require motor to run...
-
-
T"NERL Scientists Studying Solar Try Solving a Dusty Problem"...
