Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by tgmaxx

  1. tgmaxx

    Voltage Output to Low Impedance E/P Transducer

    Thanks Roy. That will work, as I do have 4-20mA outputs. The easiest place for the resistors would be at the PLC, but the distance between the PLC and E/P's could be up to 200 or 300 feet. Any thoughts on that?
  2. tgmaxx

    Voltage Output to Low Impedance E/P Transducer

    I have many old E/P transducer that requires1-5VDC inputs. My PLC voltage output card can supply 1-5VDC, but requires a load impedance of at least 1kohm. The E/P transducer's input impedance is only 333 Ohms. Does anyone have a recommended solution to this problem? (short of replacing the E/P's?)
See more

Part and Inventory Search

Back
Top Bottom