Hi,
I got it to work by not using the serial cable and just doing it via ethernet module. MUCH BETTER performance.
Thanks for the support though.
I am sure I will have more questions in the future.;)
Take care,
Simon
Hello,
Sorry but the handshaking is not clear to me.
One thing I noticed is in the hardware setup, the USB Com Port is setup as:
Bits per second 9600
Data bits 8
Parity None
Stop bits 1
Flow Control None
However when i configure the port in RsLinx it is set at 19200. Should it be 9600 also...
Thanks for the quick reply.
The RSlinx communication is:
2.52.00.17 (CPR9)
Is this okay?
The COM port for the serial to usb does show up fine in the hardware setup so I think you are right, it is okay.
I did do the auto config setup and that worked fine too.
In general the connection works...
Hello,
Our company bought some basic PLC equipment and RSLogix5000 software to learn how to program PLCS.
The specs are below:
Hardware:
Allen-Bradley Company
Logix5555 Processor with 750Kbyte MEmory
1756-L55M12
1756-L55/A 1756-M12/A LOGIX5555
16.21
Software:
RSLogix5000
V16.03
Computer:
HP...
