We have an assembly that contains small parts/wiring/connections that is then encapsulated in a mold using a epoxy resin. I need to be able to remove the volume of those small parts from the mold in Pro/e 2000i2.
I'm having brain freeze now on how to remove a volume of one part that is...
Thanks to all that replied.
It turns out I was not given all the information. I only recieved the drawing not the specification sheet with the tolerance block.
I have a drawing that states the following :
Interpret drawing per ASMY14.100-200, dimensions and tolerances per ASME Y14.5M.
In the drawing all the dimensions in the drawing are untoleranced. Do I interpret these as basic dimensions?
I had to do something very simular to this. In a process that we do We need to compress and item under rotation with known load for manufacturing (2000-3000lbs)
I used a load cell from omega (LC203-5k. One end is threaded into the base of the machine, the other is threaded in to a metal disk...
you are correct the damping would only need to be in the axial direction of the initiator although the 2000g shock can occur in any axis.
i didn't even think of heating of a spring if used as a damper when enviromental test are done.
We have thought that we may need some type of damping system, but space wise we are constrained. This entire initiator assym. must fit in a .75" diam x .75" tall cylinder.
The initiator will activate a chemical process via pyrotechnics in the a joining volume. This chemical process (600 C to...
I have been asked to work on a inertial initiator for an artillery shell that would work at the following coditions. Its been a while since i've had to do any serious mechanical design calculations so i am unsure of how to approach calculations. Although I have no problems drafting the design...
Reid Tool supply web site. 2d and 3d cad drawings of almost every thing in their catalog.you can order their cd or view and download for free individual drawings.
https://reidecom.reidtool.com/xephr/qbe/REID_CAD
Let me tell you of my current employer with a private defense manufacturer. I work for a small private defense manufacturing company. We make a only one product, a critical componet that is used by all three of the big guys (Rayheon, Boeing and Lockhead).
We have the choice of either standard...
I use proe 2000i2 and i export iges files to autocad. However i use autocad mechanical desktop. Autodesk discontinued iges import after release 14, but is still in the mechanical desktop product.
When you import the iges in autocad reads it as a wireframe model. If i want to convert it back...
My company received world that we are going to be funded for several (5-10) Pro/E licenses. For the past two years I was the only one in my company (defense industry) that used Pro/E. I have been converting legacy AutoCAD drawings to Pro/E and interfacing with our customers who use Pro/E. Since...
My company has decided to do weld sample analysis in house. We have all the needed Buehler equipment to prepare metallographic samples. I have sectioned off a sample of two peices of 304 that have been tig welded. I have already ground and polished the samples to a mirror finnish
I need to know...
the users in my company that need to view drawings but don't need a cad program use volvoview from autodesk. Its a free download. I don't know about integrating it with vb6
Try setting up multiple hardware profiles. In Windows, CONTROL PANEL, SYSTEM, HARDWARE, HARDWARE PROFILE. Create a copy of your current windows hardware profile.
Then in one of them remove the wireless card from the hardware list and set it so windows will not detect the PNP device at start...
I have had no problems with running 2000i2 on my XP pro machine. Also no problems with using an OEM branded 64mb ATI Radeon video card with dual monitor outputs on this machine. Dual monitors are nice when converting legacy autocad drawings to 3d models and not having to switch back and forth or...
