Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by subsearobot

  1. subsearobot

    single point diamond lathe consultant?

    Howdy! We have access to a single point lathe at a local college. We have a great ultra-precision machinist turned mechanical engineer. We are interested in iterating on some freeform optics, and looking for the shortest path to getting there. Outsourcing the DT gives longer leadtimes than...
  2. subsearobot

    sourcing optical PMMA

    Howdy folk! WE have a new project that requires us to diamond turn some optics for prototyping. I'm relatively new to the optical game, so i don't even have a manufacturer of material to start with. Please let me know if you know who to approach to buy high pmma blanks intended for optics in...
  3. subsearobot

    orange edge highlights are SLOW: Helix features

    Hey all, I have created some custom threads in my model using the helix command. Whenever my mouse overflies the feature in the tree, all of the edges of the threads are sequentially highlighted in orange. this takes several seconds for each feature, and as such, is slowing down the operations...
  4. subsearobot

    Learn the Surprising Truth about Plastics & The Environment

    I work in the polymer industry, while I used to work in the marine industry. The ocean is massively polluted by polymer waste. The waste is harmful to almost all forms of ocean life. Without healthy oceans, we all die. This post is entirely self serving. Claiming that there is no ocean gyre...
  5. subsearobot

    accelerated creep testing in Ultem

    Hello folks, I am reviewing a design that uses unfilled ultem as a structural component with a sustained load. Cheap FEA (Nastran, linear) predicts low strains in the bulk at around .2%. This part, however, requires very high physical precision, so if it creeps at all, could knock out...
  6. subsearobot

    Additive materials to resist water absorption

    I have a structural PLA part that has been submerged in fresh water for 3 years in the California sun. It is still perfectly functional. That said, PLa is crap, and unless it works with your spcific use case, it will not work!! what is your use case?
  7. subsearobot

    creep in PEI

    Hello all, I am looking for information about stress relaxation in unfilled PEI. Specifically, I have a design where the sustained load induces a ~3000psi stress in the unfilled ultem. Looking for creep data for room temperature PEI to determine whether this is acceptable for long term service...
  8. subsearobot

    precision Polymer gears

    3D Dave, thanks for the info- good stuff. I need to read up on cycloidal profiles. our molds are made with wire edm, so the shape is totally independent of the tooling needed to create it (except wire diam, of course). we are not bound by hobbers. my assumption regarding backlash, based on my...
  9. subsearobot

    precision Polymer gears

    Hello folks, I am involved an instrumentation application where molded gears are needed. Originally, the gears were customized by a consultant using Kissoft. When we went to tooling, the molding team redesigned the geartrain using AGMA profiles (to ease the inspection). This molding house makes...
  10. subsearobot

    spherical on end of shaft

    Nice, thx Brian. I hadn;t thought about the zero velocity issue. of course.
  11. subsearobot

    spherical on end of shaft

    It is strange, because on several different production examples that i have, the ball was made in two steps. when I say production, only ~100k per year. I examined ball surfaces with a micrograph. It appears that the ball was machined with a stub on the very apex, which was subsequently...
  12. subsearobot

    spherical on end of shaft

    I was trying to avoid the flat, but the flat on flat seemed fine in an informal examination.
  13. subsearobot

    spherical on end of shaft

    Hello all, I am designing a shaft detail that requires a spherical on the end of a shaft. the ball fits into a socket, which allows minimal torsional coupling, while allowing a strong axial connection, and is self centering between elements. It's a spring biased push shaft that does not couple...
  14. subsearobot

    high temperature adhesive for polypropylene!

    Hello experts! I am in need to an adhesive that ca bond with a glassfilled polypro. Bond must retain up to 121C (250F) loads are low- this will be used for a product badge, but it must remain bonded indefinitely. anyone have any experience, please drop a link! Or, ideally, anyone know of a...
  15. subsearobot

    windup of "compression" spring

    3DDave, nice. i was thinking that he misunderstood the mechanism of the spiral cut shaft. your explanation makes more sense. thanks!
See more

Part and Inventory Search

Back
Top