Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by StudB8

  1. StudB8

    Pressure Vessel installation alignment tolerances

    Please advice where i can find tolerances for vertical and horizontal pressure vessels alignment.
  2. StudB8

    shim plates under structures

    Thank you all .. got the point.
  3. StudB8

    shim plates under structures

    hokie66, thx for ur valuable answer, but let me ask the question in a different way, from metallurgical point of view .. "black steel in contact with galvanized steel embedded under grout" is there any probability to rust.
  4. StudB8

    (ASME VIII) Pressure Vessels alignment tolerances

    anybody please advice about reference standard for pressure vessels alignment tolerances .. in most projects i find such tolerances in project specification (1mm/meter length of the vessel with maximum 25mm), but actually i dont know such tolerances based on which standard.. note: the...
  5. StudB8

    shim plates under structures

    totally appreciate your answer .. but my question is regardless my client requirements, is it required or recommended by any international standard or code. as i see that shim plates anyway will be embedded under grouting and not exposed to air and rust, and in my previous projects i`ve never...
  6. StudB8

    Pressure vessels alignment tolerances

    anybody please advice about reference standard for pressure vessels alignment tolerances .. in most projects i find such tolerances in project specification (1mm/meter length of the vessel with maximum 25mm), but actually i dont know such tolerances based on which standard.. note: the...
  7. StudB8

    shim plates under structures

    yes, its galvanized
  8. StudB8

    shim plates under structures

    Please anybody advice .. Are shim plates under structural steel should be galvanized?? .. as it`s required by my client and i dont find any reference standard for such requirement ?
See more

Part and Inventory Search

Back
Top