Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by SteffenJoergensen

  1. SteffenJoergensen

    Sketch from reuse library, loses it¦s constraints

    Hi John. Thank you for the answer. It seems to create a new csys everytime i´m adding the sketch into my model, however the constraints I used between the sketch and CSYS, isen´t created again.. I´ve constrainted the sketch so that when i move one line, the other lines move accordingly, and...
  2. SteffenJoergensen

    Sketch from reuse library, loses it¦s constraints

    Hi. When i use a sketch from Reuse Library it seems to lose its constraints. In the original part, the sketch is perfectly constrained together, however this dosen´t seem to matter. I´ve tried to constraint it to a csys, but when a define the reusable object, I cant chose the csys, so i guess...
  3. SteffenJoergensen

    Reuse Library, pictures on folders.

    Hi Cubalibre00 If I understtand you correctly, I am suppose to Right mouse button on the folder in member select? I´ve tried it many times, which also was the reason I wrote this thread. It wasent working in 7.5, so i installed 8.5, but this dident work either?! The only option i get when i...
  4. SteffenJoergensen

    Reuse Library, pictures on folders.

    I forgot to tell, we´re running NX 7.5.5.4
  5. SteffenJoergensen

    Reuse Library, pictures on folders.

    Hi all. We´ve been using Resuse library for some time now, and we´ve started to get a lot of files into the different folders. When i open these folders im able to set the view to Thumbnail, Preview etc. so that i am able to see the pictures i´ve attached to the object. Thats very nice, but...
  6. SteffenJoergensen

    Automatic subtract for ejectors

    I´m going to take a better look into Mold Wizard and reuse. Thanks Regards Steffen
  7. SteffenJoergensen

    Automatic subtract for ejectors

    Try this onehttp://files.engineering.com/getfile.aspx?folder=86786807-074d-460a-85d5-8189b2eb2406&file=Skµrmbillede_2012-04-26_kl._21.48.52.jpg
  8. SteffenJoergensen

    Automatic subtract for ejectors

    Sorry forgot this part We´re running NX 7.5.4.4
  9. SteffenJoergensen

    Automatic subtract for ejectors

    Hi all At the company i work we construct mold & die tools for toys, which of course uses ejectors. At the moment we have a standard palette with all of our standard ejectors. Each ejector have a "subtract solid" on a reference set, which is linked into the parts needed, ex cavity insert, and...
See more

Part and Inventory Search

Back
Top