Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by SSood

  1. SSood

    FRP tank Inspection

    Thank You Gentlemen Appreciate your help. With Regards Sood
  2. SSood

    FRP tank Inspection

    Hi Everyone I would like to pursue my inquiry regarding the inspection of our double walled fiberglass underground storage tank system. We want to perform the integrity check for the tank and want to estimate how much longer we can safely use our tanks with little risk of a leak (what is the...
  3. SSood

    Release prevention barrier

    Hi I just need to know how many types of Release prevention barriers(RPB) are there and what are there applications. Some link or attachment that can help me to know more of it as I have to do a presentation on the inspection intervals with RPB and without RBP. Thanks
  4. SSood

    Release prevention barrier

    Hi Gentlemen Need information regarding release prevention barrier? What are the types of Release prevention barrier? Please refer from where i can get the information regarding this? Regards Sood
  5. SSood

    Repair procedure for Sump

    Hi Foundation type is concrete foundation and asphalt layer(thk not known) is there between concrete foundaton and bottom plate. And sand layer is there between concrete and sump walls for detecting leak. There is no pole attached.
  6. SSood

    Corrosion

    None is stored. Only Sea Water for hydrotest & floatation test was used during the time of test.
  7. SSood

    Corrosion

    Hi Guys We are experiencing some corrosion issue on a Storage Tank (dia 36m / ht 16m) as described, A) BOTTOM PLATES : • Severe, localised corrosion on A36 steel plate • size of ~10mm circular (>20 spots) • almost corrode through the thickness of bottom plate (thk ~6mm) over period of...
  8. SSood

    Repair procedure for Sump

    Hi Bimr Bulging out around the sump. Refer to the attachment. Thanks Soodhttp://files.engineering.com/getfile.aspx?folder=df494738-68f5-429b-a2f6-1d46df6d1b6d&file=bulging_around_the_sump.JPG
  9. SSood

    Repair procedure for Sump

    Hi I have noticed that there was a bulging in the sump area of storage Tank, and was found to be beyond permissible limit. The sump is 1 meter in diameter and is in the center of storage tank which is 23 meter in diameter. 1.What could be the possible reason for the bulging? 2.Being an API...
See more

Part and Inventory Search

Back
Top