Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by ssm23671100

  1. ssm23671100

    Fresh Water Corrosion

    The anodes are level with the weid between the good and bad plates.Thanks for the return cheers.del
  2. ssm23671100

    Fresh Water Corrosion

    I have a narrow boat on the canal system in the UK it is only four years old and some of the 10mm bottom plates are badly corroded,and one of the plates welded to the others is fine,as it is flat bottomed they are all at the same depth.I have had metallergy tests done, the only differance is in...
  3. ssm23671100

    radio communication in noisy areas

    Have used a throat mic in the military and under situations were their are lots of bangs and such also more important virtualy whispering, and lots of jumping around.So I should look at military surplus sites, but make sure the impedance,and plugs and sockets etc. are compatable.
  4. ssm23671100

    DIY underwater corrosion meter...zinc reference cell? silver?...?

    I have a problem with corrosion not in seawater but fresh water.the 10mm bottom plates on the narrow boat as pitted from stem to stern but the bow plate which is welded to the corroded plates shows no sign of corrosion.I have had ameterlurgical annalasis done.this shows the bow plate came from a...

Part and Inventory Search