Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by SRC90

  1. SRC90

    Thread torque

    Hi, I need to calculate torque needed to tighten the bolt. Problem is that the bolt and the hole are not of the same material, and the thread engagement length is fixed - usually smaller than recommended. I just want to know is this right way to do it, or at least on the right track. L -...
  2. SRC90

    Fluent battery module

    Hi, I was wondering if anyone here is familiar with fluent battery module, i have few basic questions about it and how to get started, i know how get data for it but the modeling and setting it up is still somewhat unclear to me. Any help would be appreciated. Regards
  3. SRC90

    Workbench - electic boundary conditions

    Thank you for your reply, I tried that but i get is still way off from my measurements, i got about 39°C when i did the test and in the simulation i get 65°C with thermal electric and about 200°C when with just thermal when i put internal heat generation. As thermal BC i put radiation...
  4. SRC90

    Workbench - electic boundary conditions

    Hi, I'm trying to simulate temperature of my conductor if a certain current is passing through it. It's a long flat rectangular conductor. I'm interested how to correctly put boundary conditions, especially electric ones. I tried to put 0V and 4V at the ends but then i get enormous currents, if...
See more

Part and Inventory Search

Back
Top