Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by spaggioli

  1. spaggioli

    Would the water flow around this insert be equal?

    Little inch simplicty in manufacturing is key in this instance, Your layout would give me much more even cooling though. From what I am uderstanding from all your responses my intial layout should give me results that I am looking as the insert is highly thermal conductive and the cooling flow...
  2. spaggioli

    Would the water flow around this insert be equal?

    The cooling flow is pressurized to achieve turbulent flow in this aplication to optimze cooling if this helps at all. A friend suggested I place an in line baffle/diverter from the cylindrical suface to the inlet pipe and outlet pipe creating two seperate circuits around the cylinder, I think...
  3. spaggioli

    Would the water flow around this insert be equal?

    Would the water flow around this cylindrical insert be equal? This method would be used to cool the cylindrical insert as uniformly as possible and have the insert easily manufactured. http://files.engineering.com/getfile.aspx?folder=8aa91c38-67b7-4d93-9318-a82256ac8122&file=WATERFLOW.jpg
  4. spaggioli

    Fenner fht-3 pulley design specs

    Yes I have tried the web site and also requested infofrom the company no luck as of yet and the final design is a rush as always. Thought I might be able to get the information here faster as I have 52 pulleys in one design and 34 in another.
  5. spaggioli

    Fenner fht-3 pulley design specs

    I am looking for design specs for Fenner FHT-3 pulley any idea where I might locate this information.
  6. spaggioli

    Positioning an imported feature

    Is it possible to reposition an imported feature relative to a previously created part in Solidworks? The standard postion is rotated 15 deg. from where I need it.
  7. spaggioli

    Is Pro-e capable of creating multiple cutouts as outlined

    Is it possible to create a cut thru one part using another part then rotate each of the parts a given angle on their own axis and make another cut. I would need to do this with some sort of automation as I would need the angles to change a given amount for each of the parts between cuts and do...
  8. spaggioli

    coating or process for aluminum

    I have a need to apply a coating or process of some type to one or two pieces of aluminum in a plastic injection mold assembly to prevent galling. The components are made from Alumec 89 and operate at a maximum heat of 400 deg fahrenheit the clearance between the components can only be in the...
  9. spaggioli

    Software for electronic file data Management

    My situation is this we are a small manufacturing company we produce a lot of prototype work for a large variety of customers(250 or so). As their product designers are using 3-d software we are now seeing all kinds of file types. AUTOCAD, PRO-E , CADKEY, SOLID WORKS, MASTER CAM for...
  10. spaggioli

    Software for electronic data management

    My situation is this, we are a small manufacturing company we produce a lot of prototype work for a large variety of customers(250 or so). As their product designers are using 3-d software we are now seeing all kinds of file types. AUTOCAD, PRO-E, CADKEY, SOLID WORKS, MASTER CAM for native...
  11. spaggioli

    MOLD DESIGN

    DHUFFY, I agree with you about the evaluation of a system. The information I was looking for was others experiences With some of these system as we are a small mold design Department and need to weed some of the worst players out. A lot of these packages look great on the surface but when You...
  12. spaggioli

    user forums

    Any user of Cadkey. Have any of you found a good non corporate forum Other than this for Cadkey info.
  13. spaggioli

    MOLD DESIGN

    WE ARE LOOKING TO FIND THE BEST DESIGN PACKAGE FOR PLASTIC INJECTION MOLD DESIGN. EASE OF USE/AND SHORT LEARNING CURVE ARE A MUST. THE ABILITY TO USE 3D MODELS IS ALSO NEEDED. FEEL FREE TO SHARE SUCCESS AND HORROR STORIES.
  14. spaggioli

    mold design

    WE ARE LOOKING TO FIND THE BEST DESIGN PACKAGE FOR PLASTIC INJECTION MOLD DESIGN. EASE OF USE/AND SHORT LEARNING CURVE ARE A MUST. THE ABILITY TO USE 3D MODELS IS ALSO NEEDED. FEEL FREE TO SHARE SUCCESS AND HORROR STORIES.
  15. spaggioli

    solid models

    I have been asked by my companies management to evaluate and purchase a data translation software to increase our success at in house healing ,repair and translation of file formats from other systems, such as iges ,step, Parasolid , ACIS etc. To Pro/e So I am asking for your success or failure...
See more

Part and Inventory Search

Back
Top