Just for the second issues: In your HoleWizard holes, do you use though all correclty instead of blind with a huge value for the last hole? Smart Fastners also work better if you do your holes as long series, this is, in context of the assembly instead on doing in on the part level.
Daniel
Have you checked the option where the Smart Component adjust if the part is moved? Don't know why it's there in the the first palce but might be your issue!? It's a checkbox on the Insert smart feature command
Daniel
alanled,
Have you looked in to the new Smart Components that 2006 offers? If you model a part as beeing the other part cavity you can use it. Just drag'n'drop and select the components that will be affected by the "cavity" part. Try it.
Daniel
Sirius,
You mention on point 3 the need for progressive dies. SolidWorks has to add-ins called LogoPress and 3DQuickPress. The last one is surely the best (non-SW) add-in. When definig the strip, you're not using real geometry but, the part is transformed into a open-gl object. That gives you...
I understand it may seem annoying if we run TScheduler on regular working hours, but the opening and closing of SW has two purposes: to avoid irregular updates of similar files in different folders and to close the process if needed. Check that there is a period of time you can configure to kill...
Just to answer the last issue of your post, you can control for which configuration you want to apply a certain equation. For each of equation you can create a config., and define which equation will be evaluated in each config.
It's all about flexibility. It's better for the software to have...
Arcticcatmatt, is right.
The symbol for LH thread on 2D is the 3/4 circle around the hole but mirrored (the open segment comes in the 3rd quadrant).
Altough not quite often, trapezoidal, circular and multi fillet thread lack destinctive representation.
Daniel Pegas
I recognize this shouldn't be a issue to waste more time, but I've looking further an with other materials, like Acrylic... the phantom image is a Daytona Car??
Come on...If the idea is to get marketing/design advantage so let us change this image.
Solidmold
A neat challenge for RealView users
Try this:
1. Create a part and construct a plain rectangular extrude.
2. Apply a PP Copolymer material and activate RealView. Other plastics like ABS or POM also work.
You should see a "phantom" image of a warehouse. Well I see it on my laptop, a DELL M70...
The quickest way I can imagine is using the Wrap Feature. Simply create a closed sketch. Then apply a deboss wrap feature on the cilindrical face. You get your rounded cut done.
If it's not cilindrical or conical use this procedure:
Sketch the slot.
Curve>Split in one direction.
Surfce-Offset (...
Altough not well documented inside help, there's a neat feature for toolbox custom properties. You can add custom properties to a Toolbox part and even create a drop-down list when adding the component to a assembly. Imagine you use some certain screw standard a lot. But the position where you...
Damnsam, you can check the wall thickness with SolidWorks Utilities. You enter a target thickness and you'll get a nicely gradient painted part from min to max thickness. When passing with the cursor over the part you get the thickness on that point. Check it out! If you don't have Office, I...
Adrian2
If your model is to be used very often, maybe you get more productivity in generating properties linked to dimension and parameters, like the diameters and pattern instances. These are then reused as a note composed of the desired properties on your 2D view.
Again, does make sense If...
I receive several machines with toolbox components from other Sw users. Since I continue to work on them I was trying to found out a way to add those external toolbox parts into my own Toolbox. I don't want to copy them since I use configs for other machines that the external files don't have...
brrian,
There's another trick. You can add as many properties you like into the weldment profile. You may want to add Coating Color, Cost per unit, Material among other properties. If they exist in the profile, the cut-list will be populated with these properties.
Daniel
