Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by SMF1
-
Interchanging of hot and cold stream in plate type heat exchangers
Perhaps I wasn't very clear with the problem statement either. Hot fluid is process condensate, enters from top nozzle Cooling water is cold fluid, enters from bottom nozzles Now hot condensate should enter from left side of the exchanger as per data sheet of HX i.e. inlet of process...- SMF1
- Post #4
- Forum: Heat Transfer & Thermodynamics engineering
-
Interchanging of hot and cold stream in plate type heat exchangers
Are hot and cold sides of plate type heat exchangers interchangeable? as per manufacturer's data sheet the hot and cold (inlet/ outlet)nozzles are marked but they don't match the field orientation i.e. the left and right side nozzles are swapped. is it advisable that we install them in as-is...- SMF1
- Thread
- Replies: 4
- Forum: Heat Transfer & Thermodynamics engineering
