Unfortunately, I don't know how to test that or how to fix it. It just sucks we have to have our laser down for so long. We're using our CNC Router, but that takes 3 times as long. When you have 165 sheets of 6' x 11' sheets of Aluminum, it adds up.
I have ultra-high purity gas, and no error messages. By looking at everything, it should be running properly. The gas was Tuesday of last week. It ran perfectly until last Thursday.
I was in the middle of cutting a piece, and it started to spit. I brought the laser to 0-point to change the...
I actually thought the same thing about it being that far off of center. That's one of the reasons I tried with the 7.5" head. I knew that one was just calibrated, but it still was not working.
As far as the lens being upside down, that's not the problem. The head was cutting one minute, then...
My work place has a BTL3500/ByStar 4020. I was cutting .125 aluminum last week with no issues.
At one point, the laser started to spit. I brought it to 0-point and changed the nozzle, as it had some slag built up. I used the hand tool to pulse the laser, so I could center the beam, but nothing...
Job Number 0851
ByStronic ByStar 4020
Lately, we've been having a lot of water leaks. We've replaced the nipples 6 times in 2 weeks. We just cannot get them to stop.
I took several days off from work. When I came back, the second shift operator informed me that we were having a plausibility...
