Thanks for the information. This has to do with parts my company manufactures in brass and whether they could be used. 316 stainless is also susceptible to stress corrosion cracking in this environment for overhead suspension. Stainless Steel in Swimming Pool Buildings
This is lots of information available about steel and stainless fasteners for indoor pools. Does anybody know how brass fasteners may hold up in such in environment when used to suspend objects overhead? ie ceilings, lighting fixtures hvac equipment.
Sorry forgot to mention using SW2007 SP3.0. The biggest problem I'm having is that everything is already dimensioned and notes with pointers already placed. All of these things fall outside of the break lines so its not a case of them not being there because they fell in the section where the...
Sometimes when I do a break view on a drawing some or all of the dimensions and notes disappear. When I un-break the view they are there but when I go back to the break view they are not visible. Is there some way to resolve this?
I'm looking at suspending some low volatage (<30V) lighting with a 7x7 304 stainless steel aircraft cable. I also want to run 30V DC through the cable to power the light. So the suspension cable is also supplying the power. I will be running 4 separate cables (only 2 will be used to supply...
I have looked into this with UL and they said as long as we use a class 2 power supply this is fine.
I have also seen similar lighting to this but it usually is something that spans from one wall to another. The lights that attach to the cable are very light weight. We are suspending much...
I'm looking at suspending some low volatage (<30V) lighting with a 7x7 304 stainless steel aircraft cable. I also want to run 30V DC through the cable to power the light. So the suspension cable is also supplying the power. I will be running 4 separate cables (only 2 will be used to supply...
I had a very similar problem updating from 2001 to 2006. The issue was either a bad update CD or the CD we got was not SP0 it was SP3.0 or something. No one could figure out what the problem was. Finally my VAR gave me a 2006 SP0 CD and I installed it without absolutely no problems. I then...
I have been playing around with Photoworks for some time now and I have not been able to produce a photorealistic reflecive metallic part for a product image. I have a cylidrical part with nickel plating that I need to try and render in photoworks and have it acutally look shiny and reflective...
I work for a company that primarily makes parts out of C36000 Brass. We have a potential application in an indoor animal lot where ammonia will be an issue as well as plenty of moisture. From what I have researched so far ammonia and copper including brass are not compatible. Would an...
The same error came up. Its something to do with a spiral becuse we have the same problem with springs. I also took this same part in 2001 and deleted the sketches as well and it opend no problem.
