Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by robinbir

  1. robinbir

    Assembly Relation st4

    Excellent! thanks beachcomber!! It works like you stated. Well, the 'query box' tab is name 'select tools' in my st4 which confused me for a moment. Now the search function performs like what I like! thanks.
  2. robinbir

    Assembly Relation st4

    Thanks Spaceballster for the guidance. That clears my doubt for that. One issues I have is when I work on large assemblies with a lot of parts that shows in pathfinder. To search a part I want I need to look and scan on each part name from top to bottom. Any method to search and jump/highlight...
  3. robinbir

    Assembly Relation st4

    Hello, I would like to ask help and guidance on the following matter. Im working on an assembly created by other people with quite a large parts in the assembly. It have relation with most of the component. I know that if I select one part the relation of that component will show at pathfinder...
  4. robinbir

    ST4 issues with drafting

    Really thanks for the feedback beachcomber! I do understand each cad software package needs different approach. :)
  5. robinbir

    ST4 how to remove unknown coordinate system?

    Excellent! Thank you beachcomber!!
  6. robinbir

    ST4 how to remove unknown coordinate system?

    Please see attached for illustration. I have a cylinder part design before ST4, I try to hide the coordinate system but there is a number coordinate system remain. (i draw a line with question mark) In ST4, I made a new square part and there is no number coordinate system shown even after I...
  7. robinbir

    ST4 issues with drafting

    The dowel/ream symbol is similar to center of mass symbol. We use this for machining and fabrication processes, usually its for interference fit of dowel pin to reamed hole during assemblies. This is use with the ISO 'Fits for basic hole system' tolerance f7 or H8 hole. Well, compare to other...
  8. robinbir

    ST4 issues with drafting

    Thanks the help for clarify #3,5 and the solution for #4 (it works). For #2, I just cant find it like you stated. Hopefully solutions can be found. For #1, I know what you mean with the datum feature for Geometric Tolerance(GDT) but what Im looking for is the dowel/reamer symbol that place on...
  9. robinbir

    ST4 issues with drafting

    Im working in a company that have 50 years of old drawing from tracing to autocad 2D and now solidedge. Most parts/components mainly still uses 2D draft for submissions. I have been using SolidWork prior to my current company. Recently, Im using Solidedge ST4. In 3D designing its worked out...
See more

Part and Inventory Search

Back
Top