Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by retropmas
-
2-Dimensional Temperature Distribution in Pipe
The seal is not all that far away from the process fluid. The nozzle is 9" long, then a valve, flush ring, and finally the seal. The whole apparatus is roughly 2ft from the vessel. The nozzle is filled with Nitrogen, but all the metal will readily conduct heat all the way to the seal with very...- retropmas
- Post #3
- Forum: Chemical process engineering
-
2-Dimensional Temperature Distribution in Pipe
Looking to install a 2" nozzle in the spent wash oil sump on a VPS. The nozzle will function as a Nitrogen bubbler type lower LC connection with a diaphragm seal between the nitrogen and the fill fluid. The problem is that I'm not sure what temperature to tell the instrument guy to spec the fill...- retropmas
- Thread
- Replies: 3
- Forum: Chemical process engineering
