Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by rescheu

  1. rescheu

    please help with this

    Thank you ted now all I have to do is size the pulleys to keep pump at 300 with enough torque also so it will not stall engine
  2. rescheu

    please help with this

    Ted the out stroke will be loaded the return will be unloaded the specs on the rod are 2.25 all the specs are in the post , with the exception of motor size . I will size motor to achieve desired results , as I read it I will need a motor to turn at 3000 per minute .
  3. rescheu

    please help with this

    I will provide the engine I need to accomplish the task I do not have an engine as yet .
  4. rescheu

    please help with this

    would this pump provide the fluid I need to accomplish my goal High Pressure Hydraulic Clutch Pump — 2.32Cu In. Features + Benefits Top of page GPM @ RPM: 11.6 @ 1200 19.4 @ 2000 29.1 @ 3000 Key Specs Top of page Item# 1082 Ship Weight 35.0 lbs Max. PSI 3,000 GPM 11.6, 19.4, 29.1 Rotations...
  5. rescheu

    please help with this

    Sorry for the typo the in and out port on the cylinder are both 1/2 inch
  6. rescheu

    please help with this

    Hello I am new to the site and have a question , I have a Prince two spool valve rd522gcga5a4b1 25 gal max 1/2 working port in I also have a Nortrac cylinder bore 5 inch stroke 30 inch shaft 2.25 with 1/3 inch ports what can I expect for a time from closed to open position on the ram with...
See more

Part and Inventory Search

Back
Top