Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by RBobroski

  1. RBobroski

    Best way to utilize top down design for mating enclosure halves without having the Adv Asm Extension

    I wound up doing the following. I made the skeleton part file, and did two extrudes in a family table to split this in half. Then I made a design assembly with both skeleton halves and created parts in that assembly that will be the true halves, then did a merge/inheritance option so each half...
  2. RBobroski

    Best way to utilize top down design for mating enclosure halves without having the Adv Asm Extension

    So I'm designing a tool that has two clam shell halves to it. I designed the overall final product as a skeleton, and now I want to use this skeleton to propagate the geometry to the halves, however we do not have the advanced assembly extension here so copy/publish geometry is not available...
  3. RBobroski

    Seeing what assemblies a part is used in from part file itself?

    I'll look into this Findmymother.exe. Thanks. I'll have to get my Admin's approval on it before I download and install any executable file so hopefully I can find some information on it.
  4. RBobroski

    Seeing what assemblies a part is used in from part file itself?

    Ah, I see. Well that makes my job more difficult. Thanks! Do you know on the offchance that if I change a part name and forget to pull a certain assembly into session, that It can locate it on the new name without having to rename the part back to the name the assembly used to reference? If I...
  5. RBobroski

    Seeing what assemblies a part is used in from part file itself?

    Initially I designed certain components for let's call it Assembly 1, so they were all in the Assembly 1 folder. There was no point in putting them in my library for this reason. Over the following 5 years we slowly developed products similar but different to Assembly 1 that share a lot of...
  6. RBobroski

    Creo-Hole Callout Not appearing

    I usually manually add the notes like \/&d2 x 82* &d3 depth when it isn't too complicated.
  7. RBobroski

    Renaming model tree features after removing some?

    Is there any way to get Creo 2.0 to rename the features? For example as I design I may have Extrude 1, Extrude 2, Offset 1, Solidify 1, Round 1, Round 2, Round 3, etc. But then as I go and do cost reductions I remove and reorder some features so my model tree may look like Extrude 1, Round 11...
  8. RBobroski

    Resolving small edges when creating Tapered Surfaces

    My accuracy is already at .0001". Yeah I might have to; and I was all excited at this easy draft-within-extrusion feature!
  9. RBobroski

    Resolving small edges when creating Tapered Surfaces

    Hi guys, I'm creating a plastic rotationally molded part with the parting line in the middle. I'm trying to extrude surfaces with a 1 degree taper however I am having issues with tiny surfaces appearing. It appears that both surfaces are tapering normal to the sketch; despite both sketches...
  10. RBobroski

    SERIOUS ISSUE: Corrupted Wildfire 4.0 files after update to CREO 2.0

    I do have backups of all my files on another network drive and most of my work is saved on a separate network drive so no data is pulled from my local machine save the license files now. I have no indications in my event log of a potential HDD issue although I may have missed it. The file that...
  11. RBobroski

    SERIOUS ISSUE: Corrupted Wildfire 4.0 files after update to CREO 2.0

    Hey guys. Major problem I'm having here. We updated to Creo 2.0 from Wildfire 4.0 about two weeks ago. I haven't switched over however due to me being in the middle of a big design project that had to get finished. Two weeks go by, no real issues. Yesterday, however, in the process of me...
  12. RBobroski

    Converting Sketch Point to Datum points

    Wow, I didn't know you could do that. Been using the program for three years now. This helps immensely, thank you.
  13. RBobroski

    Pro-E 4.0 and Organic Surfaces

    Surfacing can almost be its own discipline because there is so much you can do with it. Do you have an image or a detailed account of exactly what you are trying to do? As for tutorials there is a good surfacing one entitled "Pro/Engineer 2001 Pro/Surface Topic Collection." It's a PDF from PTC...
  14. RBobroski

    No Questions here, just want to say thank you.

    This forum alone has turned me from a college student who could barely make a threaded screw to a full time design engineer. I owe a lot of it to you guys. No specific questions here, I just want to say thank you for all your patience and I hope you all have had a Happy Holiday!
  15. RBobroski

    Any way to add notes or comments in Sketcher?

    Jeff, This may not be exactly what you are going for but when I have critical dimensions on a drawing file I put a Note number in a triangle from my sketcher palette and then add that to my note tree in the left. For example next to the .540 but a /1\ and then on the notes on the side of...
See more

Part and Inventory Search

Back
Top