Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by rammtc123

  1. rammtc123

    DEFINING THE HEAT TRANSFER PROBLEM

    I have attached a pdf.I think that will define the problem more clearly. These are the inputs that i could get from my superiors. Please help me Thanks in advancehttp://files.engineering.com/getfile.aspx?folder=3f005a23-785e-4e23-8cfb-c0a6e522bb57&file=Problem_statement.pdf
  2. rammtc123

    DEFINING THE HEAT TRANSFER PROBLEM

    @ Big inch Thanks for the reply.This is my first post in first forum.You stated that i poorly described the problem.Can you please help me in stating the problem?.What should i provide (drawings,assumptions) etc.I'm new so please guide me. Thanks in advance
  3. rammtc123

    DEFINING THE HEAT TRANSFER PROBLEM

    HI ALL I HAVE A TIRE CURING PRESS WITH UPPER AND LOWER HOUSING AND THE MOULD. (MOULD 90% IN UPPER HALF AND 10% IN LOWER HALF.THE MOULD IS HEATED AXIALLY BY TWO STEAM PLATENS AND ALSO RADIALLY BY JACKETS.THE MOULD IS SURROUNDED BY 2mm THICK ALUMINIUM SHEET AND THEN BY 40.5mm THICK GLASS...
See more

Part and Inventory Search

Back
Top Bottom