Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Pushkar4Mechanical

  1. Pushkar4Mechanical

    Is there any corelation between seal plan and nozzle loading criteria???

    Nozzle load criteria and seal plan coralation
  2. Pushkar4Mechanical

    mechanical seal

    Somebody please highlight major changes in API 682 3rd edition and API API 682 4th edition for mechanical seal
  3. Pushkar4Mechanical

    Nozzle Load table in API 610

    Applicable for API pumps. Qualifying nozzle loads and movements for imposed piping loads using CAESAR.The maximum size covered is up to 16',selecting allowable based on nozzle size and rating for150# are accessible,see table-5 of API-610,And choose for the orientation of nozzle inline with your...
  4. Pushkar4Mechanical

    Nozzle Load table in API 610

    criteria used for nozzle load is based on movement( basically .0050 to .0100 depending on the size of the pump.) over the coupling end of shaft due to forces Fx, Fy, Fz, Fr . These forces are taken into consideration for checking movement of the entire assembly when load is put on,Movement of...
See more

Part and Inventory Search

Back
Top