Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by principiante
-
Boundary Conditions and Springs
Hi FEA way, There are no contact constraints in this model. The hollow rod is connected to the plate in the back of the picture with a tie constraint on the touching surfaces to enable the transfer of the torque. Bearing A is realized with a reference point and kinematic coupling to the surface...- principiante
- Post #3
- Forum: Finite Element Analysis (FEA) engineering
-
Boundary Conditions and Springs
Hi guys, I'm trying to get the correct bearing reaction forces from the simulation of a torque rod. There are two bearings. Bearing A fixes the part on the rotation axis but allows for rotation (roller bearing). Bearing B inhibits the roation (basically a connection to the ground). The torque...- principiante
- Thread
- Replies: 5
- Forum: Finite Element Analysis (FEA) engineering
