Recent content by prens11us

I have a 48" oil line having gate valves on it. A gate valve is defined by two node numbers (a rigid). I want a one restraint for a valve. How can I put the restraint. On which node should I put the restraint. I want the restraint to support the valve by the center of gravity. thanks in...

For fire water pump having 20" suction nozzle, is it required to install a strainer. The fire water is supplied from a water tank.

thanks apc2kp

Hello all, we have a 4500 meter 48" pipe line. 3000 meter of it is designed in accordance with asme B31.3 and 1500 meter of it is designed in accordance with asme B31.4. the line is continuous line. 31.3 states test pressure of 1.5 X Desgin pressure. 31.4 states test pressure of 1.25 X Desgin...

tanks for the information. elevation is average 5 m

hello all, I am doing stress analysis for 6" fire water line for crude oil tanks. Should I include wind loads. In small diameters do we take into account wind loads. thanks in advance

Hello all, I am preparing a data sheet for strainers which are located on the suction line of the fire water pumps. Should these strainers be temorary? In which code I can find information about strainers. Does anyone knows any source about strainers. Thanks in advance. Prens

Which standard you are using for your design?

Hello all, I am preparing a data sheet for strainers which are located on the suction line of the fire water pumps. In which standard I can find information about strainers. Does anyone knows any source about strainers. Thanks in advance. Prens

It is located in Azerbaijan. I look at the formulas in http://www.gouldspumps.com/pag_0006.html. but I guess these are for water. can I find a formula for crude oil.

Hello All, I need to get some sources about the theory of the vortex formation at the tank outlet and vortex breaker design to prevent the vortex. The tank is a 21 meter height and 92 m diameter crude oil tank. Outlet pipe is 48". There are some formulas which is related with froude number...

Hello All, I need to get some sources about the theory of the vortex formation at the tank outlet and vortex breaker design to prevent the vortex. The tank is a 21 meter height and 92 m diameter crude oil tank. Outlet pipe is 48". There are some formulas which is related with froude...

Hello all we are constructing a 48" crude oil line in accordance with ASME B313. we'll take a branch from existing line by a hot tap operation. How can I find an information about at what temperatures does the impact have to be carried. thank you all.

yes you are right 25362. All are belowground elevations. pump is in a pit.

(114 meter) __________________ | (110 meter) | | | |...