Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Precise

  1. Precise

    Lack of knowledge..true position

    I have found that some of our customers are moving over to GD&T however they seem to not understand it completely. They are actually making the location of the holes >2.5 times "tigher". For example on some holes they used to call out +/- .005 in cartesian coordinates, they now use true...
  2. Precise

    True position with Perp control

    The reason I am using Position and Perpendicularity control was to control the holes location to within 2 thou and the hole needs to be perpendicular to within .0002 tenths. Position does control perpedicularity however not tight enough so this is why I used both. I assume I am correct but was...
  3. Precise

    True position with Perp control

    Can you use true position with a perpendicular control?
  4. Precise

    Need a machining company recomendation.

    Contact Ross or Anderson at Moscow Mills Manufacturing 1-802-253-2036 ext 103 www.moscow-mills.com
  5. Precise

    Prototyping

    eliou, There are many things which when drive the price, turn around time, qty, tolerances of the part, coatings, surface finishes, number of features and types of features, material etc.... Best thing to do is design the part for manufacturability. If you have a part which you are not sure...
  6. Precise

    Anodize Layer.. what is it.....

    What is the actual layer that "grows" 1/2 into the part and 1/2 out? I have heard and read off the internet that it is.. Aluminum oxide Aluminum hydrate Aluminum hydroxide Which is it??
  7. Precise

    Parallelism question verification

    So please view the section drawing of a round disk with a raised portion in the center. Hopefully it is semi clear? [ // | .01] | v ____________+++++++++++_______________ |...
See more

Part and Inventory Search

Back
Top