Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by pk123

  1. pk123

    looking for shelf life data for polyurethane cushioning

    Hi I am looking for shelf life data on polyester foams per Mil-PRF-26514G, Type III, Class 2, Grade D”. Any help would be most appreciated. (I have checked all the mil-specs etc but came up with nothing). Thanks
  2. pk123

    Shear strength data for stainless 302 wire .032" dia.

    Hi Does anyone know where or how I can get shear strength data about stainless steel wire 302/304 for small diameters (0.032")? Thanks
  3. pk123

    should I be using pure shear or bending?

    Hi Ruth44 and ishvaag Thanks for your replies. I have a question though. I do not understand exactly what you mean by using a triangular distribution for the reaction load? Do you mean a right-angled triangle (meaning that the highest load is closest to the UDL)? If not, then what? Also, how...
  4. pk123

    should I be using pure shear or bending?

    Hi I have a design where I have a 2.5mm diameter pin that is 28mm long. It is inserted into a hole where the middle of the hole is open (ie. approx 7mm at each of the pin is situated in a hole (note: interference fit).BTW, the whole thing can be assumed to be symmetric. The exposed middle (14mm)...
See more

Part and Inventory Search

Back
Top Bottom