Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by PipMec

  1. PipMec

    TEMA HEAT EXCHANGER - Expansion Joint

    Hi, Is it true that TEMA standards specify minimum length requirement for an expansion joint used on a shell of a (shell and tubes) heat exchanger? Thank you.
  2. PipMec

    Plate with a bore

    Hi, A plate (A105) with a tappered bore (1/2") is to be installed between a pair of flanges (B16.5). The logical thing is to use a plate with a thickness equal to the orifice flange's for the corresponding pressure class and diameter. And then make the bore to the required size. Is there...
  3. PipMec

    code for boring (machining) fittings from a sch to a sch ?

    Hi, A plate (say A105) with a tappered bore (1/2") is to be installed between a pair of flanges. The logical thing is to use a plate with a thickness per ASME B16.36 (orifice flanges) for the corresponding flange pressure class. And then make the bore to the required size. Is there any...
See more

Part and Inventory Search

Back
Top Bottom