Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by PDSVINOD

  1. PDSVINOD

    Flange rating

    JLSeagull & 11echo, Thanks for the reply. ASME B 16.5 says , for dimension of CL900 flanges below 3" refer to the table for CL1500. I am looking for a reference in the code , which mentiones that below 3" in CL900 , the call out should be CL1500. In other words , does the code prohibits the...
  2. PDSVINOD

    Flange rating

    I have a class 900# piping spec. The materials engineer specifies up to 2.5" size the rating as 1500#. I know the dimension for 900# & 1500# matches up to 2.5". But during the dicussion , I was told that the as per code it is wrong to specify flanges below 3" to be 900#. So I would like to...
See more

Part and Inventory Search

Back
Top Bottom