Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
panter's latest activity
-
panter replied to the thread Commutator marks in DC Motors.It should be noted that type and construction of the brush has not changed. A sandwich brush could reduce the problem with this problem...
-
panter replied to the thread Commutator marks in DC Motors.Additionally, I would check the tightness of the screws holding the main and auxiliary poles and measure the air gap between the rotor...
-
panter replied to the thread How to test short in alternator rotor winding inside the slots?.To begin with, you would have to measure resistance of the winding and compare it with the values from generator test sheet. As it is...
-
panter replied to the thread Surge diverter in RTD terminal box.GR8blu , It seems to me that you are right. I predict that the first 6 PT 100 detectors are two per stator phase. Last two could be for...
-
My best guess: "SD" stands for "stator detector". The OEM did a poor job of identifying terminals on their wiring diagram. What they...
-
panter replied to the thread Generator with low IR.It is interesting that the resistance of the phase windings to ground is less than the phase-to-phase resistance. Generator is small and...
