Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by OmarMuz
-
Impact Test Exemption of Stiffener Ring Material, PQR & Welds
yes the filler metals was tested by the manufacturer and found accepted "UCS-67(a)(3) when joining base metals exempt from impact testing by UCS-66(g) when the minimum design metal temperature is colder than −55°F (−48°C)." the confutation came from that our MDMT are -46°C and the...- OmarMuz
- Post #6
- Forum: ASME (mechanical) Code Issues
-
Impact Test Exemption of Stiffener Ring Material, PQR & Welds
DekDee I'm not welding engineer, and your case is different as the stiffener ruing have other function david339933 yes, the impact was done for the filler metal and failed- OmarMuz
- Post #4
- Forum: ASME (mechanical) Code Issues
-
Impact Test Exemption of Stiffener Ring Material, PQR & Welds
We have a mounded storage tank for LPG with capacity of 4000 m3. And the stiffener ring for the tank was welded with unapproved WPS and PQR. Since the PQR failed in charpy impact test at required MDMT of -46°C. Stiffener rings are impact testing exempted as per §UCS-68 (c) and §UCS-67 of ASME...- OmarMuz
- Thread
- Replies: 6
- Forum: ASME (mechanical) Code Issues
