Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by OilRD

  1. OilRD

    Welding of 825 Cladded material

    Or can we weld first with ENiCrMo-3(Alloy 625) electrode for root and hot pass(considering cladding thickness is 3mm) followed by CS electrode for CS backing material.
  2. OilRD

    Welding of 825 Cladded material

    Thanks for response, what could be reason then some of the client ask for buttering with Alloy 625 or 825 on weld bevels on both sides prior to girth welding using E-NiCrMo-3(Alloy825) electrode.
  3. OilRD

    Welding of 825 Cladded material

    I have Carbon Steel pipe cladded with Alloy 825 and I would like to join two cladded pipes and there is no access from other side(Single sided weld joint). Can I directly weld with ENiCrMo-3(Alloy 825) electrode, without doing buttering on weld bevels prior to girth welding using 825 electrode.
See more

Part and Inventory Search

Back
Top