There are ~5 of us using SW 2007 x64 on Windows x64. We have the same issues with drivers although our IT guy is starting to find more. We have identified some quirks with the x64 version of SW, but not more than with the typical yearly update.
There are two issues that we have which are...
The issue has been resolved. Our IT person was in direct contact with SW, but the first representative took us down the wrong path. The second recommended we do what Bradley mentioned. That seemed to work.
Nick
1. We are in the same building
2. Our server runs Server 2003.
Our IT Tech just informed me that he was applying the latest 2003 MSE update? I'm not sure what that means, but I hope it works.
Nick
We have just upgraded from SW 2006 to SW 2007 SP2.2.
SW 2006 and PDM Works 2006 worked great with our workstations(x64 and x32), network and server. Since upgrading, SW 2007 runs extremely slow when the PDM Works add-in is loaded. Once in a great while, I can succefully check-in a simple...
I have the most recent driver from Logitech installed.
"This version of 3DxSoftware includes an x64 bit version of the 3Dconnexion Windows driver (3DxWare), an x64 version of the SOFTIMAGE|XSI plug-in and a new plug-in for UGS NX for SpacePilot. 32-bit or x86 versions are also included for the...
Hello,
I was recently upgraded to a 64bit workstation running Windows x64 along with SW 2006 SP3.4 and SW 2006 x64. I have a Logitech Spacemouse that I have become very accustom to using.
The Spacemouse runs perfectly with SP3.4, but the 3Dcontrol add-in is not available in the 64bit version...
I have never actually done this, but it makes sense in my head:
Try creating a layout sketch in the card part file which incorporates the angular relationship. Then, create a mate reference which references the angled line in the sketch and an edge of the hole in the middle of the card. Once...
Hello,
I am looking for ideas on ways to track results quickly and accurately. How do you keep track of results from load condition #1 through #10 for 5 different designs? I have been using Word to keep a running log of the analysis, but it is cumbersome to copy and paste/insert the results...
Hello,
I am having problems with the Run All Studies command. I am able to run the studies indiviually and get results. However, when I try to run all studies, the log file tells me that no loads or boundary conditions are present. What am I missing?
I am using COSMOSWorks 2006...
These are two books I have on my shelf. I believe there are new editions available for each.
Tractors and Their Power Units, 4th Ed., Liljedahl, et al, ASAE
Engine & Tractor Power, by C.F. Goering, 3rd Edition
Parker has 3D models for many types of fittings:
http://www.parker.com/ead/cm2.asp?cmid=815&
McMaster Carr
Alot of the products have 3D models available for download. I have downloaded many pipe fittings.
http://www.mcmastercarr.com/
Good Luck
Nick
I had problem renaming a part file. To make a long story short, I spent 1 hour on the phone with my VAR and Solidworks. The best suggestion they had was to restart the vault service on the server. I followed their suggestion and the problem was solved. Apparently, the file structure had to...
Hello,
I am looking for company who can make a pressurized stainless steel air tank. The basic dimensions are 6.00OD x 22" Long. The maximum pressure will be 120psi. Both our purchasing department and I have spoke with several vendors. From those conversations we have received 2 "no quotes"...
I completed my MS directly after receiving my BS. However, my future wife was on still on campus and I wanted the MS for personal satisfaction. I don't use it in my current job.
You need to ask yourself why you want the MS degree. Do you want to get more knowledge in a specific area or do...
