I'm a new user of sheetmetal and I'm unable to unbend a oval shape wall with a draft angle. When it's roud with a draft angle it work's,and it also work's when it'a oval without a draft angle. Is their a trick to make it unbend? I'm using wildfire 2.0 . I'm sure a ace of sheetmetal as a trick...
I would like to simulate a metal plate going down on a plastic tote. I have donne simulation with contact region before, but what I don't grasp with this one, is how to let the plate move along one axis to apply the load. I always presume that all parts needs to be fully constrain, so my plate...
Hi all,
We have a new plotter HP DesignJet 800PS. It's working fine with other software but with Pro/E we have some problem's with the amount of paper we are using. It's seem like the printer always use a 54¨ long piece of paper, even if we send a D format. He roll's down the paper and...
How can you make a contact between 2 parts if you know that they will touch but are almost perpendicular?
I'll explain my self : I have a part with a V shape and the 2 legs of the V bows to the outside. I have a load on a plate on top of the V, that touch the top of the 2 legs. The more...
What we do, before starting the modification is to make a save a copy of the part with a date. So you always modify the part with no date, the 2d drawing & the assembly are always good and we can easily find the older version (the ones with dates).
