Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by nlpm

  1. nlpm

    slug catcher design

    Ok, Schlumberger program only simulate the two phase and determine the type of flow,liquid holdup,slug volume,slug length and slug frequency but not determine Slug catcher size or design, i ask if there is program can help in slug catcher desgin or how can i use the output of pipesim to design...
  2. nlpm

    slug catcher design

    is there any software uesd for slug catcher design ?
  3. nlpm

    slug catcher design

    what the procedure i must follow to size slug catcher volume if i have liquid holdup,slug volume,slug length, slug frequency
  4. nlpm

    standard size for slug catcher

    Dear GregLamberson , I'm sorry but was tired searching on the site and internet for slug catcher design procedure and filled do found any specific procedure for sizing slug catcher, i hope that you can help me in that
  5. nlpm

    1/1000 slug length

    thanks hyposmurf & BigInch for yours repaly the slug i mean as BigInch is a type of two phase flow but BigInch i don't think that (1/1000 slug length ) have the meaning that you say
  6. nlpm

    SLUG Control Valve

    dear MortenA, if you found solution for your problem i hope to share it with me because i'm intersted by ( remove pipeline slugging )
  7. nlpm

    1/1000 slug length

    what is the mean of (1/1000 slug length )in the pipesim Output Summary and also what (1/1000 slug ) method for determine ing slug volume
  8. nlpm

    Advise on How to become a "good" Process Engineer

    i think it will be useful to learn pipesim plus Hysys also it will be very useful to read this book Surface Production Operations Volume 1 & 2 http://www.knovel.com/knovel2/Toc.jsp?BookID=1256
  9. nlpm

    standard size for slug catcher

    I do search on site (http://eng-tips.com)for slug catchers desgine and also search all internet web but i can not get acquired answer on how to desgine slug catcher. if there is book or web site or procedure which i can use as guide in this subject i will be thankful. also depend on the...
  10. nlpm

    standard size for slug catcher

    Very thanks for quick replay Are that mean that slug catcher size = 392 bbl = 62 m3 Or we use 392 bbl slug in others equations to calculate slug catcher size thank you again
  11. nlpm

    standard size for slug catcher

    very thanks Mr,GregLamberson - pipe OD = 8 inches - pipe wall thickness= .5 inches - pipe length = 10.7 km - gas S.G = 0.79 - Water S.G = 1.2 - API = 40 - GOR = 673 SCF/STB - liquid flow rate = 3700 STB/d -Water Cut 57.000 (%) - Gas Flow Rate .......... 1.0707 (mmft3d) and...
  12. nlpm

    Offshore Survival equipments

    What part of API covering Offshore Survival equipments required on Mained oil production platform
  13. nlpm

    standard size for slug catcher

    very very thanks mr.GregLamberson for your time and effort. I hope if any one work with pipesim can help me
  14. nlpm

    standard size for slug catcher

    Thanks GregLamberson for your quick replay but i used pipesim in my calculation and according to pipesim the output will be : -liquid hold up will be =450 bbl - liquid swept in front of a pig ("liquid by sphere") = 290 bbl That in case of the liq flow rate = 3900 bbl/day and big time = 3 hr...
  15. nlpm

    standard size for slug catcher

    thanks mr, if the liquid swept in front of a pig = 290 bbl what will be the slug cather size and how i can Calculate it?
See more

Part and Inventory Search

Back
Top