Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by msucvleng

  1. msucvleng

    EPANET

    My fire line t's into another proposed fireline that has a fire hydrant at each end. Thank you for your time. -Kim
  2. msucvleng

    EPANET

    I am finally getting back to working on this project now that I am on spring break. The information I have from the fire flow test is as follows: Static 52 psi. Pitot pressure 1 = 35. Pitot Pressure 2 = 32. Residual Pressure 40. Outlet diameter 2.5 with discharge coefficient of 0.90. The basic...
  3. msucvleng

    EPANET

    Hydrae, Thank you for your response. I will work on the setup tomorrow. I went thru the tutorial. Will the hydrant be modeled as a junction? If so, how do I input the information from the test flow? I'm open to any advice. Regards, -Kim Thank you for your time. -Kim
  4. msucvleng

    EPANET

    Hello, forum. I am new to using EPANET. However, it is required for submittal on a project on which I am working. Here is a description of the situation: I am designing a new fire water line and connecting to an existing city main. I have flow test information on a hydrant not far from my...
See more

Part and Inventory Search

Back
Top Bottom