Hi!
Has anyone tried these "Pop-A-Plug® P2 High Pressure Tube Plugs"? How well they perform on cyclic pressure and temperature changes? On boilers for steam production and corrosive environment of refinery.
Any thoughts guys.
thank you very much!
Hi Everyone,
We need to replace portion of our refractory inside a reactor. For abrasion resistant lining, we are using hex mesh to support the refractory. Access and work area of this section is difficult. A portion of a pipe air distributor located inside the reactor needs lining...
Hello Everyone,
Big Thanks to your responses! Regarding the confusion i made, please let me clarify some queries.
The purpose of the agitator is to mix the impounding basin. Ideally the basin is a mixture of water from different sources. So basically the mixture component qualities are...
Thank you for your inputs.
I would to correct my first statement, liquid to be mix are water from different sources, storm drain, RO reject and treated waste water. Density of mixture is close to that of water.
Side entry for mixer is not possible. what are my possible options for us to...
@littleinch sorry for creating confusions, I think i phrase it wrong on mixing water and oil. Honestly i am not very familiar with the purpose of this project. As i was told, we need to install agitator on this big lagoon, an impounding basin. I'll get back to you when i've gathered enough...
Hello,
can you help me find a solution on how to mix/ agitate an open pond with dimensions of 72m x 72m and depth of 6.5meters?
If i am about to use an agitator, our problem is the mounting and support for the drive train and motor.
The fluid is a mixture of oil and water with fluid density...
