The red dot that you find on the tire is a alignment mark for the tire valve,the yellow dot is the heavy spot of the tire,to indicate to the tech if he has a out of balance wheel assembly to counter balance the wheel and tire assembly,scott @ goodyear.
Would it be easier to use nascar brake paint to indicate the temp on the nuts.Many racing bodies use this paint of differnt colors to indicate the temp that component is reaching,painting the nuts the different colors would show the highest temp it is getting,scott
John,with that imfo I would agree that it will work just like a regular auomotive system.And the addition of EFI,it will reduce the amount of gas that will reach the crankcase,by running at a perfect air/fuel ratio.Now you can flip over a number of valve covers from dodge ,ford,gm and others to...
John,I do not think a PCV valve will work on your motor,as to for it to work,there has to be a variation in the rpm and vacumn to open and close the valve.If the motor stays at a constant rpm,there will be no use for the valve,as it will be closed all the time.Using a vent system to the carb...
One of the old drag racing tips we used to do is keep a cooler full of ice and water and put bath towels in it and remove them and ring them out a small amount and place them on the intake manifold before a run.The difference is felt right away.By doing this you see how much heat is transfered...
Header rap and thermo plankets for the exhaust system works to help in reducing the under the hood temps and by using ceramic coated headers or manifolds help too.To gain a better fuel charge,use a reverse rotation water pump to cool the heads first and keep the block warm.This means that you...
