Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by MMCrash

  1. MMCrash

    Modified Flanges as Listed Components

    I would use a 2" x 3/4" Reducing Flange. The bore for 3/4" is 1.09" for slip-on and 1.11" for lap joint flanges. If you can weld with the a gap. If you want a tight fit use 2" x 1/2" and bore out. The hub for the 2" x 1/2" is1-3/16"
See more

Part and Inventory Search

Back
Top Bottom