Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by MJL14

  1. MJL14

    PN16 Raised Face Diameter too small

    Thanks for the link......I'll give it a try. I have reported the problem back to the manufacturer which may result in complete rejection of all the flanges (which is 700+). The mill is co-operating but the final decision will come from my customer because of the timeline involved. The flanges...
  2. MJL14

    PN16 Raised Face Diameter too small

    I have recently imported a number of DN100 PN16 raised face flanges in stainless steel. The diameter of the raised face should be 158 mm (+2.0/-1.0) but it has come in undersized at 150/151 mm. The rest of the flange is dimensionally correct and the finish on the raised face is perfectly...
See more

Part and Inventory Search

Back
Top