Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by metudgn

  1. metudgn

    nozzle clogging with ladle shroud

    One heat is around 110 tons. So, adding 30 kg of Al shall be very small quantity. We are stirring the steel with Argon plug underneath the ladle during Ladle Furnace operation. We are workig with Ca-silicate type ladle slag. During CCM operation, Alumina type ladle shroud is used, and faced...
  2. metudgn

    eaf gas analsis

    Hi, We have an increase of water temperature in the first off-gas duct after combustion chamber. Does anybody can say regarding the issue? What is the minimum pressure of the cooling system of DC-furnaces? Can anybody advise me a company to buy off-gas analyzer on the furnace?
  3. metudgn

    nozzle clogging with ladle shroud

    hi, we are casting plain carbon grades in our continuous cating machine with 0,17-0,20 % C; 0,70-0,80 % Mn; 0,15-0,20 % Si; 0,030 % S; 0,010 % P. No Aluminium and Calcium wire addition is applied in ladle furnaces. Only 30 kg of Aluminium is added during EAF tapping. During open casting, we...
  4. metudgn

    spray water pressure

    hi, I need information about the effect of spray water pressure on the solidification profile in the secondary cooling zone of continuous casing of steel
  5. metudgn

    off-gas analysis in EAF

    Hi, We have an increase of water temperature in the first off-gas duct after combustion chamber. Does anybody can say regarding the issue? What is the minimum pressure of the cooling system of DC-furnaces? Can anybody advise me a company to buy off-gas analyzer on the furnace?
See more

Part and Inventory Search

Back
Top