Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by MechAg06
-
Plate and frame HX modification
Matt Since you are using a new water utility you may be able to make up some of the difference by increasing its flow over the current CW supply rate. But if the hotside Delta_T is fixed at 9, you won't be able to get all of the way there. At a 15F cold-end approach, you would need a 27F delta...- MechAg06
- Post #6
- Forum: Heat Transfer & Thermodynamics engineering
-
Shell & Tube Exchangers in Series
I see two immediate areas of concern. Here are the questions that I would ask if it were proposed to me. 1. Can over-performance (e.g. clean condition or extra-cold process supply temp) occur in the first shell that will reduce the heating medium temperature to the second shell? Can the...- MechAg06
- Post #2
- Forum: Heat Transfer & Thermodynamics engineering
