Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by maldor

  1. maldor

    Siphon Spillway Design

    I think you should start with the publications of the U.S. BUREAU OF RECLAMATION. But if the dam, or the risks involved in the problem, are important, your first reference must be the publications of the Congresses of the ICOLD (International Comission on Large Dams). Good luck.
  2. maldor

    Buckling of an arch

    In a reinforced concrete arch we denote by F its rise (the height of crown over the springing line) and by L its span. Then, the ratio F/L indicates the "flatness" of the arch. I'd like to receive some information on the limiting value of F/L for which the buckling of the arch may...
  3. maldor

    post-tensioned box girder - description of the erecting?

    The first time that method was used was in 1930 in the construction of the Santa Catalina bridge, over the Peixe river, in Brazil. The engineer was BAUMGART, and the bridge was a REINFORCED concrete bridge with 68 m. central span. In 1937, the method was used in England in other r. c. bridge of...
  4. maldor

    REINFORCED CONCRETE ARCH BUCKLING

    Eureka: Thanks for your help. I've considered that book as a clear and useful introduction.
  5. maldor

    REINFORCED CONCRETE ARCH BUCKLING

    I am loking for some guidance to analyze buckling of a reinforced concrete arch. Any help, book or reference would be very appreciate. Thanks.

Part and Inventory Search