Does anyone have a good website that I could download CAD files of fasteners to import into AutoCAD? The website I normally use is very limited. Thanks!
It would fall back on me if the laser cutting is bad due to the drawing. Maybe I should stick to the method I already use. Good food for thought though, I'll have to look it up and test it out and check the contour. Thanks!
"cvg is right, and my position is that shoddy workmanship should not be accepted"
I agree with this statement 100%. My problem is that I have tried to talk to the engineers about some of these problems, but nothing seems to change. It seems to me that a big company like them doesn’t want to hear...
I already thought about and have tried requesting better files in the past with this customer. It is normally quicker for me to fix the drawing than to wait for them to do it, I don't always have the time to wait, like with this job. I'm done now and it was a very tedious task, but I would still...
Sometimes my job requires me to scale dxf files from a customer and use for production, for a laser cutting operation. It is important that all the lines in my drawings connect. The problem I keep running into is that the files I receive not all the lines connect, the only way I know how to...
Is there a way to change the color of the polar line? In AutoCAD 2000 the line was white by default, but it 2006 it's a dark grey and it is hard to see. If there a way to change the color and how do I go about doing so?
When I create a new part in ACAD I always dimension the part before I add in all my corner radiuses and never had any problem doing so. Today seems to be different because after I dimensioned the part, I added the radiuses and all the dimensions jumped off of the intersection points and went to...
I'm running AutoCAD 2006 Educational Version, and I feel lost with some of the new settings I'm coming across. On all of my plots, "Produced by an AutoDesk Educational Product" shows up on all four sides of the paper. How do I eliminate this from my printouts? Did I goof in the installation...
