Recent content by MAH82

Dear friends There is flame unstability in our gas turbine burnures on premix mode. It would be appreciated if someone intruduce a related reference to explain the reasons or any comment on it.

Dear All The nozzels of fuel gas burners in our gas turbine have been clogged due to ingress unclean fuel gas flow through them. It seems the gas line was not enough clean and was including some particles and sands. Now, the manufacture company is commenting to remove all the burners out and...

We want to flush or cooling line by demin water while the temp. is about -10 oc. I am worry about freezing the water inside the pipe lines during circulation. would you please help me that during the circulation at 10 0c is any possibility to get water frozen?

Hi would somebody explain me about technical usage of spiral wound gaskets? we are using them in water cooling line with max. 10 bar pressure and max. 50 degree temprature but we have problem for leakages through the flanges. it would be highly appreciated if somebody intruduce me a reference...

could some body explain me what is the defference between demin water and normal water in terms of freezing and boiling point? or even some more physical specification. any reply is appreciated.

thank abeltio. but i don't know about OEM. and how can i enter it.

I like to learn about the premix and diffusion mode for turbine fuel and some how more in detail, as well about the type of combustion chambers. any information or address would be appriciated.

dear gary this was exactly taken from a erection manual for a compressor cleaning equipment. the conductivity is less than .5 micro siemens.

I want to know what's the straight demin water and what's its difference with demin water.any answer would be appriciated.

hi during the erection of our Generator we got arc welding on the bearings and due to it the surfase of bearing(babbit) was damaged.we are considering the earth system but please in this regard if any body has an idea or similar experience present to me.

1-have you accomplished thermal shock during the flushing process? the particles can be stayed on the welding joints and during the operation are releasing through the bearing. oil analysis can not show any thing in this regard. 2-have you used mesh to detect the particles on intrance of the...

we have cooling system for our Generator. this system includes the directly air cooling heat exchangers(fin fan system), directly generator cooler and interconnection piping. we have used the water flushing to clean our pipes but we have got the rust inside the pipes and we dont no what is the...