Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by maew

  1. maew

    Grout annulus VS Crown shim

    What is the difference of the method of connecting platform jacket to pile between "grout annulus" and "crown shim"? Could anybody advise pros&cons of these method?
  2. maew

    Wet&Dry Buckle

    What is the difference between wet buckle and dry buckle during pipe laying? How to correct them?
  3. maew

    Subsea shut down valve

    I have some problem about breaking design pressure of the subsea gas pipeline. Our pipeline length is 600 km long, inlet and outlet pressure is 2500 and 700 psig. As you know, we don't want to design all 600 km pipeline with the design pressure of 2500 psig. So we need some equipment to break...
  4. maew

    What factor should we consider about ball valve?

    First, thank you very much for all suggestions. They're very helpful. Msmedesign, I have one point to discuss with you. About greasing / lubricating the ball valve before commissioning. Most vendor do recommend us don't grease valve. But in our experience, during gas in when commissioning, gas...
  5. maew

    What factor should we consider about ball valve?

    What factor should we consider for approval new ball valve (that we have been never used before) to our vendor list? In my opinion, because almost vendors have nearly same design, (except for distinctive features for some vendors, as rotating seat of Cooper Cameron), so it's difficult to judge...
See more

Part and Inventory Search

Back
Top