Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by m_elkordy

  1. m_elkordy

    Water Hammer Analysis for a forcemain that rises and then runs flat

    Hi LittleInch, Thank you for your reply. I am using Bentley Hammer for the Analysis. At the time I wrote the original post I was just thinking ahead, but now I have performed some preliminary analysis and came up with 2 options for the protection devices and a third option that involves a...
  2. m_elkordy

    Water Hammer Analysis for a forcemain that rises and then runs flat

    Dear All, I am performing water hammer analysis for an 18km long forcmain that transmits raw water from a river to a water treatment plant. The forcemain is 2 x DN1200mm pipes in parallel and flow is about 4.6 m3/sec. Starting from the pump station at the lowest point (elevation 8m), the line...
See more

Part and Inventory Search

Back
Top Bottom