Recent content by Lunar7

Have a look at openlm.com. It not free, but is very good

John, Thank you very much, once again you pointed out the simple solution to a problem that was driving me Nuts www.hella.co.nz www.hellamarine.com

What about an easy way to flip the orientation of an isometric or trimetric view around its primary axis when setting up a view in drafting ? Currently using NX9, planning upgrade to 10

Hi, Thanks for your response Pat. As I'm in New Zealand I don't have direct access to GTAC, so I have passed this on to our Reseller for them to try and get more information.

Hi, I'm the last remaining I-deas user onsite and have come up with a problem I need some advise on ! We migrated from Ideas to NX & Teamcenter back in 2009 Our current version of Teamcenter (9.1) is nearing the end of its support life. Out IT department wants to push for the upgrade to...

Hi, I think that the single 8 core Xeon E5-2630 v3 (8C, 2.4GHz, Turbo, HT, 20M, 85W)is the wrong choice, look for something with a higher clock speed and less cores. I'd suggest the Intel® Xeon® Processor E5-1630 v3 (10M Cache, 3.70 GHz) or Intel® Xeon® Processor E5-2637 v3 (15M Cache, 3.50...

Hi all Just wondering what the best solution is in NX9.0 to replaces the functionality of the Geometric Properties tool. Our CAM guys really like this tool as the can quickly hover over the part they are looking to machine and find the minimum radius anywhere along a face I know that local...

Thank you John Problem solved, toolmaker knows what he is building, Moulding have a pretty picture !!

Hi, Just wondering if anyone out there has a model of a 1/4 BSP tapered external thread ? or a way to show a detailed tapered thread that looks similar ? I'm trying to make up a simple model of a custom water fitting for our moulding shop, and although to get the part made I don't need to have...

Thank you !!!!

As an former I-deas user all I can say is about time !!!! But what happended to the modeling toggles toolbar ?

Have a look at http://www.spatialfreedom.com

I found the original Post, From a purely raw NX performance point of view (or really ANY SMP enabled software) the order of performance, best to worse, is as follows (this is assuming that all else is equal, such as clock-speed, memory, IO bus-speed, etc.): 1) Four single-core CPU's in 4...

Hi, Some time ago I thought I had read a post regarding the advantages of using 2 processors compared to multi core processors. I have search back through the old posting but can't find the answer, So apologizing in advance for going back over old issues, could I please get opinions on the...

I found the files through the link on the PLMWORLD Site GRS file linked belowhttp://files.engineering.com/getfile.aspx?folder=b8481bde-927d-4b34-a279-631ba3c4d20e&file=ray_trace.grs