CorBlimeyLimey,
I just want to make sure if you are not using "Dimension". An advantage of "Hole Wizard" is that "Hole Callout" gives all dimensions. If you use "Dimension", you have to type in, like depth, by yourself.
I have the problem too and...
Unload Statement Example
The following example assumes two UserForms in a program. In UserForm1's Initialize event, UserForm2 is loaded and shown. When the user clicks UserForm2, it is unloaded and UserForm1 appears. When UserForm1 is clicked, it is unloaded in turn.
' This is the Initialize...
Creigbm,
This is from VB help.
+++++
Note The End statement stops code execution abruptly, without invoking the Unload, QueryUnload, or Terminate event, or any other Visual Basic code. Code you have placed in the Unload, QueryUnload, and Terminate events of forms and class modules is not...
It seems the DLL is corrupted often enough, so Microsoft posted an article in Knowledge Base.
http://support.microsoft.com/default.aspx?scid=kb;en-us;305498
Just for your information.
This is how to check the memory usage.
1. Open "Task Manager" and click "Performance" tab.
2. Record a value at "Total" under "Commit Charge (K)
3. Run a macro and notice "Total" goes up.
4. Close the macro and "Total" should go back to the...
scott1971ca,
I don't have the problem any more, but I am just curios.
"Mso9intl.dll" is not in my SolidWorks folder, but in "C:\Program Files\Microsoft Office\Office\1033". It's "Microsoft Office 2000 component", file version 9.0.0.2720.
I don't have SolidWorks...
djamatoit,
I have the exact same problem. I tried "Alternative to try before reinstalling" in FAQ, but it didn't fix.
Now, this is a walk-around, but try this at your risk because you have to edit registry.
1. Go ahead and assign a macro without selecting BMP while the button for...
KelleyB,
This is a step by step instruction.
1. Tools>Macro>Record and Tools>Macro>Stop
2. You get a dialog box and you name it and save it. The place could be anywhere for now. Just remember where.
3. Tool>Macro>Edit
4. You get VB program comes up . Don't panic and all you have to do is...
I have Japanese W2K and I couldn't even start installation. The problem was Locale and Language setting. This is how I could successfully installed SW onto my Japanese W2K.
1. Go to Control Panel and open Regional Option.
2. Change Locale to English. and change default language setting to...
Is this something when you create a new drawing?
If so, go to Tool>Options and select "File Locations" under "System Options". Then select "Document Templates" and add "C:\Program Files\SolidWorks\lang\english\Tutorial". This is a default place, but if...
Somebody is missing a point!!!
I am NOT spending time for FireGL on Radeon at work. I have no interest to PC at work because IT controls fully. The time I spent was for home PC and it's my hobby. Therefore, saving time over money is out of focus. Anyway, the time I spent was about a few hours...
Thanks, 1sheetmetalman and Mindnumb.
1028 driver works and I made sure the one issue officially posted as a known problem with 9700Pro was gone with FireGL driver. I run "FINAL FANTASY XI for Windows - Official Benchmark Program 2" with FireGL driver and the result was about same...
If you are not talking about View, but changing Plane, here is how.
1. Right click on your "Sketch" and select "Edit Sketch Plane"
2. Click on "Sketch Plane" to show "FeatureManager" and select a plane as a front. (You can click the title or bottom tab.)...
Mindnumb,
I have 9700 Pro at home. I downloaded Rivatuner and installed yesterday, but can you instruct me a bit more how to load FireGL drivers? I don't think I can install FireGL drivers onto my 9700 Pro.
