Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by lmc82

  1. lmc82

    3-Phase Brushless DC Motor Loses Torque

    Thanks Mike, It really does seem to be a temperature issue at this stage. Unfortunately we can't get a decent temperature reading from the motor given the motor arrangement. The thermocouple we currently have is placed on metal work attached to the motor. I think we need to get some more...
  2. lmc82

    3-Phase Brushless DC Motor Loses Torque

    Oh, and we have placed thermocouples on the motor housing and seen no significant temperature rise.
  3. lmc82

    3-Phase Brushless DC Motor Loses Torque

    The motor is interference fit to the base of the gimbal, which is basically a large heat sink. It does look like it could be temperature related, given that the problem doesn't occur before applying the vibration profile. The information on the motor is a bit sparse in terms of derating due to...
  4. lmc82

    3-Phase Brushless DC Motor Loses Torque

    The motor has 3 phases and no brushes, the commutation is done electronically. You have a set of switches for each phase (IGBT, MOSFET, etc), connecting the phase to either DC Bus or Ground. Just Google "Brushless DC Motor". The "3-phase" has nothing to do with "DC", the motor has 3 phases. It...
  5. lmc82

    3-Phase Brushless DC Motor Loses Torque

    Hi, I've searched this thread and can't find an answer to the following question, so here goes. We have a camera pan and tilt gimbal with direct drive 3-phase brushless DC motors mounted on each axis. We have the control system setup so that the camera is pointing to one spot regardless of the...

Part and Inventory Search

Back
Top