Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Liquidgassolid

  1. Liquidgassolid

    Cooling system heat exchanger

    It is indeed a keel cooler. Fabricated from half inch square tubing there are nine tubes at 30 inches in length connected to the intake and outlet manifolds. The flow rate of the coolant in the system I estimate at 60 gpm. The flow rate around the cooler would be essentially an unlimited...
  2. Liquidgassolid

    Heat exchanger idea

    I've built a heat exchanger for a cooling system that will be immersed in cold water. I would like to cool both an engine and the exhaust manifold in a closed circuit. I'm wondering if an aluminum heat exchanger with about 10 square feet of surface area immersed in 60f water would be sufficient...
  3. Liquidgassolid

    Cooling system heat exchanger

    I've built a heat exchanger for a cooling system that will be immersed in cold water. I would like to cool both an engine and the exhaust manifold in a closed circuit. I'm wondering if an aluminum heat exchanger with about 10 square feet of surface area immersed in 60f water would be sufficient...

Part and Inventory Search

Back
Top