Try the below link....and look for "2014 Customer Training Guide". There are 4 or 5 trainings in a year and you can choose the convenient one for you.
http://www.aesseal.com/customer-training.aspx
It is most likely that the pumping ring / screw is reversed. You might want to ask the seal manufacturer to design the pumping ring/screw that can be assembled in only one direction by adding a pin - Idiot proof!
I would also prefer high temprature stationary metal bellows with plan 02(steam) + 62 (N2) for its simplicity and easy maintenance. I experienced more problems when I used plan 54 (for some reasons customer preferred). Flexibox - What did you circulate in jacketed stuffing box? Also did you use...
Hi all,
i am right now working on a mechanical seal for molten sulphur application.
what is the best seal and environment you would recommend?
i am thinking of a rotating metal bellow seal with steam heated seat. Pump has jacketed stuffing box , so steam can be circulated continuously.
Has...
Hi Norzul,
Retrofitting of seal oil system to dry gas seal requires a DGS seal with gas panel system to supply clean air or nitrogen.
Dry gas seals for a discharge pressure of 200 bar could be supplied by john crane or flowserve or burgmann.They can recommend a suitable solution based on your...
